Dieses Bild zeigt Karl Grötzinger

Karl Grötzinger

Herr M.Sc.

Wissenschaftlicher Mitarbeiter
Institut für Umformtechnik
Massivumformung

Kontakt

+49 711 685 82306

LinkedIn
Visitenkarte (VCF)

Holzgartenstraße 17
70174 Stuttgart
Deutschland
Raum: 1.030 (Galerie)

Fachgebiet

  • Massivumformung
  1. 2024

    1. Rekowski, M., Goetzinger, K., Schott, A., & Liewald, M. (2024). Thin-film sensors for data-driven concentricity prediction in cup backward extrusion. CIRP Ann. Manuf. Technol., 73, Article 73. https://doi.org/10.1016/j.cirp.2024.04.035
    2. Beygelzimer, Y., Groetzinger, K. C., Liewald, M., Estrin, Y., & Kulagin, R. (2024). The ``third body’’ approach to joining of metals by simple shear under pressure. https://doi.org/10.5445/IR/1000170651
  2. 2023

    1. Grötzinger, K. C., Kotzyba, P., Hering, O., Liewald, M., & Tekkaya, A. E. (2023). Predicting the bond characteristics of aluminum compounds during composite hot extrusion and subsequent cold forging using numerical simulation.
    2. Grötzinger, K. C., Schott, A., Rekowski, M., Ehrbrecht, B., & Liewald, M. (2023). Compensation of elastic deformation influence on thin-film sensor applied on cold forging punch.
    3. Grötzinger, K. C., Kulagin, R., Gerasimov, D., & Liewald, M. (2023). Analysis of forming limits during cold forging of aluminum hybrid billets.
    4. Grötzinger, K. C., Kulagin, R., Gerasimov, D., & Liewald, M. (2023). Consideration of shear deformation during joining by forming.
    5. Grötzinger, K. C., Schott, A., Rekowski, M., Ehrbrecht, B., Gerasimov, D., & Liewald, M. (2023). Analysis of tool heating in cold forging using thin-film sensors. 28, 2027–2036. https://doi.org/10.21741/9781644902479-218
  3. 2021

    1. Kotzyba, P., Grötzinger, K. C., Hering, O., Liewald, M., & Tekkaya, A. E. (2021). Introduction of composite hot extrusion with tubular                reinforcements for subsequent cold forging. Production at the leading edge of technology, 193--201. https://doi.org/10.1007/978-3-662-62138-7_20
    2. Grötzinger, K. C., Benko, K., Kotzyba, P., Hering, O., Liewald, M., & Tekkaya, A. E. (2021). Manufacture of hybrid components with tubular reinforcement by composite hot extrusion and subsequent cold forging. In U. Prahl & G. Korpala (Hrsg.), The Metal Foming Conference - MEFORM (S. 93–98).
    3. Kotzyba, P., Grötzinger, K. C., Hering, O., Liewald, M., & Tekkaya, A. E. (2021). Production at the leading edge of technology. In B.-A. Behrens, A. Brosius, W. Hintze, S. Ihlenfeldt, & J. P. Wulfsberg (Hrsg.), Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP) (S. 193–201). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-662-62138-7
Zum Seitenanfang